drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq()

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access.

RDMA/irdma: Prevent some integer underflows

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent some integer underflows My static checker complains that: drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init() warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'? It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure.

cpufreq: CPPC: Add u64 casts to avoid overflowing

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Add u64 casts to avoid overflowing The fields of the _CPC object are unsigned 32-bits values. To avoid overflows while using _CPC's values, add 'u64' casts.

i2c: designware: use casting of u64 in clock multiplication to avoid overflow

In the Linux kernel, the following vulnerability has been resolved: i2c: designware: use casting of u64 in clock multiplication to avoid overflow In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow by depending on the values of the given parameters including the ic_clk. For example in our use case where ic_clk is larger than one million, multiplication of ic_clk * 4700 will result in 32 bit overflow. Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.

perf/x86/amd: fix potential integer overflow on shift of a int

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: fix potential integer overflow on shift of a int The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then passed as a 64 bit function argument. In the case where i is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead.

ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()

In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init() Change num_ghes from int to unsigned int, preventing an overflow and causing subsequent vmalloc() to fail. The overflow happens in ghes_estatus_pool_init() when calculating len during execution of the statement below as both multiplication operands here are signed int: len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE); The following call trace is observed because of this bug: [ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1 [ 9.317131] Call Trace: [ 9.317134] <TASK> [ 9.317137] dump_stack_lvl+0x49/0x5f [ 9.317145] dump_stack+0x10/0x12 [ 9.317146] warn_alloc.cold+0x7b/0xdf [ 9.317150] ? __device_attach+0x16a/0x1b0 [ 9.317155] __vmalloc_node_range+0x702/0x740 [ 9.317160] ? device_add+0x17f/0x920 [ 9.317164] ? dev_set_name+0x53/0x70 [ 9.317166] ? platform_device_add+0xf9/0x240 [ 9.317168] __vmalloc_node+0x49/0x50 [ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0 [ 9.317176] vmalloc+0x21/0x30 [ 9.317177] ghes_estatus_pool_init+0x43/0xa0 [ 9.317179] acpi_hest_init+0x129/0x19c [ 9.317185] acpi_init+0x434/0x4a4 [ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a [ 9.317190] do_one_initcall+0x48/0x200 [ 9.317195] kernel_init_freeable+0x221/0x284 [ 9.317200] ? rest_init+0xe0/0xe0 [ 9.317204] kernel_init+0x1a/0x130 [ 9.317205] ret_from_fork+0x22/0x30 [ 9.317208] </TASK> [ rjw: Subject and changelog edits ]

drm/xe/xe_migrate: Cast to output precision before multiplying operands

In the Linux kernel, the following vulnerability has been resolved: drm/xe/xe_migrate: Cast to output precision before multiplying operands Addressing potential overflow in result of multiplication of two lower precision (u32) operands before widening it to higher precision (u64). -v2 Fix commit message and description. (Rodrigo) (cherry picked from commit 34820967ae7b45411f8f4f737c2d63b0c608e0d7)

The Treck TCP/IP stack before 6.0.1.66 has an IPv4 Integer Underflow.

The Treck TCP/IP stack before 6.0.1.66 has an Integer Overflow during Memory Allocation that causes an Out-of-Bounds Write.

FCGI versions 0.44 through 0.82, for Perl, include a vulnerable version of the FastCGI fcgi2 (aka fcgi) library

FCGI versions 0.44 through 0.82, for Perl, include a vulnerable version of the FastCGI fcgi2 (aka fcgi) library. The included FastCGI library is affected by CVE-2025-23016, causing an integer overflow (and resultant heap-based buffer overflow) via crafted nameLen or valueLen values in data to the IPC socket. This occurs in ReadParams in fcgiapp.c.

Artifex Ghostscript: From CVEorg collector

In Artifex Ghostscript through 10.05.1, ocr_begin_page in devices/gdevpdfocr.c has an integer overflow that leads to a heap-based buffer overflow in ocr_line8.

af_netlink: Fix shift out of bounds in group mask calculation

In the Linux kernel, the following vulnerability has been resolved: af_netlink: Fix shift out of bounds in group mask calculation When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts. Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups. To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option. [0] https://lwn.net/Articles/147608/ The way to trigger this issue is e.g. through monitoring the BRVLAN group: # bridge monitor vlan & # ip link add name br type bridge Which produces the following citation: UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19 shift exponent 32 is too large for 32-bit type 'int'

drm/bridge: anx7625: Fix overflow issue on reading EDID

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: anx7625: Fix overflow issue on reading EDID The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable.

Ashlar-Vellum Cobalt VC6 File Parsing Integer Overflow Remote Code Execution Vulnerability

Ashlar-Vellum Cobalt VC6 File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of VC6 files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25704.

Ashlar-Vellum Cobalt LI File Parsing Integer Overflow Remote Code Execution Vulnerability

Ashlar-Vellum Cobalt LI File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of LI files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25476.

dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type

In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type In zynqmp_dma_alloc/free_chan_resources functions there is a potential overflow in the below expressions. dma_alloc_coherent(chan->dev, (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), &chan->desc_pool_p, GFP_KERNEL); dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) * ZYNQMP_DMA_NUM_DESCS), chan->desc_pool_v, chan->desc_pool_p); The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though this overflow condition is not observed but it is a potential problem in the case of 32-bit multiplication. Hence fix it by changing the desc_size data type to size_t. In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in dma_alloc_coherent API argument. Addresses-Coverity: Event overflow_before_widen.

remoteproc: Fix count check in rproc_coredump_write()

In the Linux kernel, the following vulnerability has been resolved: remoteproc: Fix count check in rproc_coredump_write() Check count for 0, to avoid a potential underflow. Make the check the same as the one in rproc_recovery_write().

WAMR runtime hangs or crashes with large memory.fill addresses in LLVM-JIT mode

WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. In WAMR versions prior to 2.4.2, when running in LLVM-JIT mode, the runtime cannot exit normally when executing WebAssembly programs containing a memory.fill instruction where the first operand (memory address pointer) is greater than or equal to 2147483648 bytes (2GiB). This causes the runtime to hang in release builds or crash in debug builds due to accessing an invalid pointer. The issue does not occur in FAST-JIT mode or other runtime tools. This has been fixed in version 2.4.2.

scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption.

netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain() syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init().