iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.

GoBGP: Remote Denial of Service (Panic) in UpdatePathAttrs4ByteAs via Malformed BGP UPDATE

GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.3.0, a remote Denial of Service (DoS) vulnerability exists in GoBGP where a malformed BGP UPDATE message can trigger a runtime error: index out of range panic. This occurs during the processing of 4-byte AS attributes when the message structure causes an internal slice index shift that is not properly handled. This issue has been patched in version 4.3.0.

Incus out-of-bounds panic in snapshot metadata handling allows denial of service

Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage volume import logic allows an authenticated user with access to the storage volume feature to cause the Incus daemon to crash. The backup restore subsystem contains an out-of-bounds panic vulnerability caused by an invalid bounds check when indexing snapshot metadata arrays, and the same flawed pattern also appears in the migration path. When iterating through physical snapshots provided in a backup archive, the loop uses the index to look up corresponding metadata in the parsed `Config.Snapshots` and `Config.VolumeSnapshots` slices. The guard condition `len(slice) >= i-1` is incorrect because it can still evaluate to true when the subsequent slice[i] access is out of bounds. An attacker can submit a backup archive that contains physical snapshot directories while supplying a tampered `index.yaml` with an empty or truncated snapshot metadata array, causing the daemon to index beyond the end of the metadata slice and crash. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0.

drm/amd/pm: Fix negative array index read

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix negative array index read Avoid using the negative values for clk_idex as an index into an array pptable->DpmDescriptor. V2: fix clk_index return check (Tim Huang)

drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX [Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it.

platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses

In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these.

WordPress GTM Kit plugin <= 2.4.0 - Sensitive Data Exposure vulnerability

Debug Messages Revealing Unnecessary Information vulnerability in TLA Media GTM Kit gtm-kit allows Retrieve Embedded Sensitive Data.This issue affects GTM Kit: from n/a through <= 2.4.0.

Argo Workflows: Unchecked annotation parsing in pod informer crashes Argo Workflows controller

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14.

Step CA affected by an index out of bounds panic in TPM attestation EKU validation

Step CA is an online certificate authority for secure, automated certificate management for DevOps. From 0.24.0 to before 0.30.0-rc3, an attacker can trigger an index out-of-bounds panic in Step CA by sending a crafted attestation key (AK) certificate with an empty Extended Key Usage (EKU) extension during TPM device attestation. When processing a device-attest-01 ACME challenge using TPM attestation, Step CA validates that the AK certificate contains the tcg-kp-AIKCertificate Extended Key Usage OID. During this validation, the EKU extension value is decoded from its ASN.1 representation and the first element is checked. A crafted certificate could include an EKU extension that decodes to an empty sequence, causing the code to panic when accessing the first element of the empty slice. This vulnerability is only reachable when a device-attest-01 ACME challenge with TPM attestation is configured. Deployments not using TPM device attestation are not affected. This vulnerability is fixed in 0.30.0-rc3.

x86/fred: Correct speculative safety in fred_extint()

In the Linux kernel, the following vulnerability has been resolved: x86/fred: Correct speculative safety in fred_extint() array_index_nospec() is no use if the result gets spilled to the stack, as it makes the believed safe-under-speculation value subject to memory predictions. For all practical purposes, this means array_index_nospec() must be used in the expression that accesses the array. As the code currently stands, it's the wrong side of irqentry_enter(), and 'index' is put into %ebp across the function call. Remove the index variable and reposition array_index_nospec(), so it's calculated immediately before the array access.

kernel: gdth: Prevent negative offsets in ioctl

Array index error in the gdth_read_event function in drivers/scsi/gdth.c in the Linux kernel before 2.6.32-rc8 allows local users to cause a denial of service or possibly gain privileges via a negative event index in an IOCTL request.

Multiple array index errors in the bpf_filter_init function in NPF.SYS in WinPcap before 4.0.2, when run in monitor mode (aka Table Management Extensions or TME), and as used in Wireshark and possibly other products, allow local users to gain privileges via crafted IOCTL requests.

kernel: perf_swevent_enabled array out-of-bound access

The perf_swevent_init function in kernel/events/core.c in the Linux kernel before 3.8.9 uses an incorrect integer data type, which allows local users to gain privileges via a crafted perf_event_open system call.

Wasmtime panics when transcoding misaligned utf-16 strings

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Fiber has a Denial of Service Vulnerability via Route Parameter Overflow

Fiber is an Express inspired web framework written in Go. A denial of service vulnerability exists in Fiber v2 and v3 that allows remote attackers to crash the application by sending requests to routes with more than 30 parameters. The vulnerability results from missing validation during route registration combined with an unbounded array write during request matching. Version 2.52.12 patches the issue in the v2 branch and 3.1.0 patches the issue in the v3 branch.

Improper Input Validation in Metricbeat Leading to Denial of Service

Improper Validation of Array Index (CWE-129) exists in Metricbeat can allow an attacker to cause a Denial of Service through Input Data Manipulation (CAPEC-153) via specially crafted, malformed payloads sent to the Graphite server metricset or Zookeeper server metricset. Additionally, Improper Input Validation (CWE-20) exists in the Prometheus helper module that can allow an attacker to cause a Denial of Service through Input Data Manipulation (CAPEC-153) via specially crafted, malformed metric data.

Improper Validation of Array Index in Packetbeat Leading to Overflow Buffers

Improper Validation of Array Index (CWE-129) in Packetbeat’s MongoDB protocol parser can allow an attacker to cause Overflow Buffers (CAPEC-100) through specially crafted network traffic. This requires an attacker to send a malformed payload to a monitored network interface where MongoDB protocol parsing is enabled.

FreeRDP has a heap-buffer-overflow in urb_select_configuration

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1.

cert-manager-controller DoS via Specially Crafted DNS Response

cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates. In versions from 1.18.0 to before 1.18.5 and from 1.19.0 to before 1.19.3, the cert-manager-controller performs DNS lookups during ACME DNS-01 processing (for zone discovery and propagation self-checks). By default, these lookups use standard unencrypted DNS. An attacker who can intercept and modify DNS traffic from the cert-manager-controller pod can insert a crafted entry into cert-manager's DNS cache. Accessing this entry will trigger a panic, resulting in denial‑of‑service (DoS) of the cert-manager controller. The issue can also be exploited if the authoritative DNS server for the domain being validated is controlled by a malicious actor. This issue has been patched in versions 1.18.5 and 1.19.3.

iccDEV vulnerable to OOB in CIccXform3DLut::Apply()

iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a vulnerability IccCmm.cpp:5793 when reading through index during ICC profile processing. The malformed ICC profile triggers improper array bounds validation in the color management module, resulting in an out-of-bounds read that can lead to memory disclosure or segmentation fault from accessing memory beyond the array boundary. This issue has been patched in version 2.3.1.3.