An insecure default to allow UEFI Shell in EDK2 was left enabled in Ubuntu's EDK2. This allows an OS-resident attacker to bypass Secure Boot.

After initial configuration, the Ruggedcom Discovery Protocol (RCDP) is still able to write to the device under certain conditions. This could allow an attacker located in the adjacent network of the targeted device to perform unauthorized administrative actions.

In TRENDnet TEW-WLC100P 2.03b03, the i_dont_care_about_security_and_use_aggressive_mode_psk option is enabled in the strongSwan configuration file, so that IKE Responders are allowed to use IKEv1 Aggressive Mode with Pre-Shared Keys to conduct offline attacks on the openly transmitted hash of the PSK.

Zoom Workplace Apps for Windows - Insecure Default Variable Initialization

Insecure default variable initialization in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a loss of integrity via local access.

HAXcms's Insecure Default Configuration Leads to Unauthenticated Access

HAXcms with nodejs backend allows users to start the server in any HAXsite or HAXcms instance. In versions 11.0.6 and below, the NodeJS version of HAXcms uses an insecure default configuration designed for local development. The default configuration does not perform authorization or authentication checks. If a user were to deploy haxcms-nodejs without modifying the default settings, ‘HAXCMS_DISABLE_JWT_CHECKS‘ would be set to ‘true‘ and their deployment would lack session authentication. This is fixed in version 11.0.7.

OCPP Backend Configuration via Insecure Defaults

An unauthenticated adjacent attacker is able to configure a new OCPP backend, due to insecure defaults for the configuration interface.

[pgpool] Unauthenticated access to postgres through pgpool

The bitnami/pgpool Docker image, and the bitnami/postgres-ha k8s chart, under default configurations, comes with an 'repmgr' user that allows unauthenticated access to the database inside the cluster. The PGPOOL_SR_CHECK_USER is the user that Pgpool itself uses to perform streaming replication checks against nodes, and should not be at trust level. This allows to log into a PostgreSQL database using the repgmr user without authentication. If Pgpool is exposed externally, a potential attacker could use this user to get access to the service. This is also present within the bitnami/postgres-ha Kubernetes Helm chart.

Dell Common Event Enabler, version(s) CEE 9.0.0.0, contain(s) an Initialization of a Resource with an Insecure Default vulnerability in the Common Anti-Virus Agent (CAVA). An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.

Vulnerability of uncontrolled system resource applications in the setting module Impact: Successful exploitation of this vulnerability may affect availability.

Apache Solr: ConfigSets created during a backup restore command are trusted implicitly

Insecure Default Initialization of Resource vulnerability in Apache Solr. New ConfigSets that are created via a Restore command, which copy a configSet from the backup and give it a new name, are created without setting the "trusted" metadata. ConfigSets that do not contain the flag are trusted implicitly if the metadata is missing, therefore this leads to "trusted" ConfigSets that may not have been created with an Authenticated request. "trusted" ConfigSets are able to load custom code into classloaders, therefore the flag is supposed to only be set when the request that uploads the ConfigSet is Authenticated & Authorized. This issue affects Apache Solr: from 6.6.0 before 8.11.4, from 9.0.0 before 9.7.0. This issue does not affect Solr instances that are secured via Authentication/Authorization. Users are primarily recommended to use Authentication and Authorization when running Solr. However, upgrading to version 9.7.0, or 8.11.4 will mitigate this issue otherwise.

Default swagger-ui configuration exposes all files in the module

fastify-swagger-ui is a Fastify plugin for serving Swagger UI. Prior to 2.1.0, the default configuration of `@fastify/swagger-ui` without `baseDir` set will lead to all files in the module's directory being exposed via http routes served by the module. The vulnerability is fixed in v2.1.0. Setting the `baseDir` option can also work around this vulnerability.

Donetick Has Weak Default JWT Secret

Donetick an open-source app for managing tasks and chores. Prior to version 0.1.44, the application uses JSON Web Tokens (JWT) for authentication, but the signing secret has a weak default value. While the responsibility is left to the system administrator to change it, this approach is inadequate. The vulnerability is proven by existence of the issue in the live version as well. This issue can result in full account takeover of any user. Version 0.1.44 contains a patch.

Insecure Default Initialization of Resource in HID Global

Certain configuration available in the communication channel for encoders could expose sensitive data when reader configuration cards are programmed. This data could include credential and device administration keys.

Insecure default variable initialization of Intel(R) RealSense(TM) ID Solution F450 before version 2.6.0.74 may allow an unauthenticated user to potentially enable information disclosure via physical access.

wifi: rtw88: sdio: Honor the host max_req_size in the RX path

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: sdio: Honor the host max_req_size in the RX path Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth combo card. The error he observed is identical to what has been fixed in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem. Lukas found that disabling or limiting RX aggregation works around the problem for some time (but does not fully fix it). In the following discussion a few key topics have been discussed which have an impact on this problem: - The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller which prevents DMA transfers. Instead all transfers need to go through the controller SRAM which limits transfers to 1536 bytes - rtw88 chips don't split incoming (RX) packets, so if a big packet is received this is forwarded to the host in it's original form - rtw88 chips can do RX aggregation, meaning more multiple incoming packets can be pulled by the host from the card with one MMC/SDIO transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation and BIT_EN_PRE_CALC makes the chip honor the limits more effectively) Use multiple consecutive reads in rtw_sdio_read_port() and limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated). In case of an receive errors (-EILSEQ has been observed by Lukas) we need to drain the remaining data from the card's buffer, otherwise the card will return corrupt data for the next rtw_sdio_read_port() call.

In JetBrains RubyMine before 2025.1 remote Interpreter overwrote ports to listen on all interfaces

openshift: insecure default DNSPolicy for pods

A flaw was found in Openshift. A pod with a DNSPolicy of "ClusterFirst" may incorrectly resolve the hostname based on a service provided. This flaw allows an attacker to supply an incorrect name with the DNS search policy, affecting confidentiality and availability.

In applyKeyguardFlags of NotificationShadeWindowControllerImpl.java, there is a possible way to observe the user's password on a secondary display due to an insecure default value. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-179725730

H2O version 2.2.3 and earlier allows remote attackers to cause a denial of service in the server via unspecified vectors.

In all Qualcomm products with Android releases from CAF using the Linux kernel, the use of an out-of-range pointer offset is potentially possible in rollback protection.