Out-of-bounds read in Zephyr PTP message parsing from unvalidated message type

Zephyr's Precision Time Protocol receive handler ptp_msg_post_recv() in subsys/net/lib/ptp/msg.c takes the 4-bit message type straight off the wire via ptp_msg_type() (msg->header.type_major_sdo_id & 0xF, range 0-15) and uses it to index the msg_size[] table. That table only defines entries up to PTP_MSG_MANAGEMENT (0xD), giving it ARRAY_SIZE == 14. Before the fix there was no upper-bound check, so the undefined types 0xE and 0xF indexed one or two int slots past the end of the array — an out-of-bounds read of adjacent read-only data. The out-of-bounds value is then reused as a length: it gates msg_size[type] > cnt, and when it is small or negative it makes cnt - msg_size[type] a large positive budget passed to msg_tlv_post_recv(), whose TLV loop then walks the message suffix past the received bytes, performing further out-of-bounds reads and in-place byte-swap writes on memory beyond the message slab. The defect is reached directly from the network: ptp_port_event_gen() in subsys/net/lib/ptp/port.c reads a PTP frame with ptp_transport_recv() and calls ptp_msg_post_recv() with the attacker-chosen type. PTP uses UDP multicast or raw Ethernet (0x88F7) and is unauthenticated, so any host on the same link can trigger the indexing on a CONFIG_PTP-enabled node with no preconditions. The reliably reproducible impact is a denial of service (fault/crash); a limited memory-corruption path exists but depends on the build-specific value adjacent to msg_size[], which the attacker cannot tune. The fix rejects type >= ARRAY_SIZE(msg_size) with -EBADMSG before any indexing.

CPU exhaustion via O(n^2) BigInt construction on radix-prefixed integer literals

js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.1 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.2 fixes the issue.

vm2 has sandbox breakout via `neutralizeArraySpeciesBatch`

vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, the new method neutralizeArraySpeciesBatch works with objects from the other side but can call into this side via getter on the array prototype exposing objects of the wrong side into the sandbox. This can be used to get host objects and get the host Function object. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2.

vm2: nesting: true bypasses require: false, allowing sandbox escape to arbitrary OS command execution

vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.1, when a NodeVM is created with nesting: true, sandbox code can unconditionally require('vm2') regardless of the outer VM's require configuration — including require: false. With access to vm2, the sandbox constructs a new inner NodeVM with its own unrestricted require settings and executes arbitrary OS commands on the host. Any application that runs untrusted code inside a NodeVM with nesting: true is fully compromised. This vulnerability is fixed in 3.11.1.

cryptography has a buffer overflow if non-contiguous buffers were passed to APIs

cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 45.0.0 to before 46.0.7, if a non-contiguous buffer was passed to APIs which accepted Python buffers (e.g. Hash.update()), this could lead to buffer overflows. This vulnerability is fixed in 46.0.7.

SD JWT JS: Tampered disclosures silently dropped instead of rejected

SD JWT JS is a JavaScript implementation of the Selective Disclosure JWT (SD-JWT) specification. In version 0.19.0 and earlier, `@sd-jwt/decode`, also used by `@sd-jwt/core`, silently drops a tampered Disclosure whose digest no longer matches the Issuer-signed `_sd` array and returns a reduced claim set, reporting success while the Issuer signature remains valid. Both a tampered Disclosure that remains valid JSON and a Disclosure containing invalid UTF-8 bytes reach this silent-drop behavior. In the latter case, the `TextDecoder / Buffer` decoding path substitutes U+FFFD replacement characters, recovering syntactically valid disclosure data instead of rejecting the malformed input. This violates RFC 9901 section 7.1 step 5, which requires rejection of unreferenced Disclosures, and section 7.1 step 3 / section 4.2.1, which require rejection of invalid Disclosures. A malicious holder can exploit this omission primitive, including through `SDJwtInstance.verify()` when key binding is required. An on-path attacker can also tamper with a Disclosure when the relying party does not enforce key binding; enforced key binding rejects on-path tampering because it invalidates the KB-JWT `sd_hash` binding. If the relying party defaults to allowing access when a constraining age, role, or restriction claim is absent, the silent claim reduction can change an authorization decision without an error. This issue is fixed in `@sd-jwt/core` version 0.20.0; no patched version of the standalone `@sd-jwt/decode` package is identified.

MariaDB Connector/J: Rogue server can make the client read past the packet through server-declared lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, decoders for OK packet session-state blocks, column definition packets, text row data, or binary row data used server-declared lengths without confirming that the requested bytes remained in the receive buffer. The decoders could position reads, create sub-buffers, or decode strings beyond the packet boundary. A malicious or compromised server, or a machine-in-the-middle attacker, could trigger unchecked ArrayIndexOutOfBoundsException or IllegalArgumentException failures inside JDBC calls and terminate connection handling. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11.

pypdf: Possible long runtimes/large memory usage for encrypted PDF files

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive time and memory when an application accesses the page count of a crafted encrypted PDF whose page tree declares a forged /Count value. Even after successful decryption, page-count retrieval trusts the unvalidated declared count instead of walking the page tree, allowing the attacker-controlled value to drive excessive work and memory use. This issue is fixed in version 6.21.3.

ProFTPD before 1.3.9e and 1.3.10rc5 Buffer Overflow via mod_rewrite utf8trans RewriteMap

ProFTPD before 1.3.9e and 1.3.10rc5 contains a buffer overflow vulnerability in the mod_rewrite int:utf8trans RewriteMap that allows remote attackers to overwrite static buffers. Attackers can send FTP command arguments longer than 1024 bytes, without authentication if pre-login commands are rewritten, to corrupt session memory and crash the session.

Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 Panic via Zero-Length Stream Writes

Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 contains a denial of service vulnerability that allows guest code to trigger a host panic through out-of-bounds zero-length stream operations. Malicious guests can perform zero-length component model stream reads or writes with unvalidated addresses, causing Direct{Source,Destination}::remaining to panic and crash WASIp3 embedders.

Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 Host Panic via wasi-http

Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 contains a denial of service vulnerability in wasmtime-wasi-http that lets guests crash the host by sending long request URLs. Guests can use set-path-with-query with a '?' after byte 65535, overflowing a u16 index in the http crate and triggering a host panic.

joi: quadratic-time split in `string().email({ multiple: true })` allows denial of service

joi is a schema description language and data validator for JavaScript. From 17.1.1 until 17.13.9 and 18.3.1, the Joi.string().email({ multiple: true }) rule uses a separator regular expression whose leading whitespace quantifier is retried at every position in a long whitespace run that contains no separator, causing quadratic work during String.prototype.split. The behavior applies to the default separator and every custom separator. Applications that validate attacker-controlled values with the multiple option and no effective prior length limit can have the Node.js event loop blocked for seconds by one request, preventing other work. A .max() rule is not sufficient when abortEarly: false allows the email rule to run after the maximum-length check fails. This vulnerability is fixed in versions 17.13.9 and 18.3.1.

roundcubemail: roundcubemail: Information disclosure via SVG SMIL remote content blocking bypass

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a remote content blocking bypass. rcube_washtml inspected the SVG SMIL animation attributes `to`, `from` and values for URIs, but not `by`; so markup such as in an HTML message caused remote content to be loaded without the user's consent, disclosing the client IP address and confirming that the message was opened. Upstream fixed this in the commit “Fix remote-content blocker bypass via SVG SMIL `by` attribute”.

Out-of-Bounds Read in Font Parsing Leading to Memory Disclosure

An out-of-bounds read was addressed with improved input validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing a maliciously crafted font may result in the disclosure of process memory.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. Processing a maliciously crafted file may lead to a denial-of-service or potentially disclose memory contents.

An integer overflow was addressed with improved input validation. This issue is fixed in visionOS 27.2. Processing a maliciously crafted 3D model may lead to memory corruption.

Integer Conversion Vulnerability Resulting in an Out of Bounds Read in NI LabVIEW

There is an integer conversion vulnerability resulting in an out-of-bounds read when loading images recently discovered in NI LabVIEW.  This may result in information disclosure or arbitrary code execution.  Successful exploitation requires an attacker to get a user to open a specially crafted VI file.  This vulnerability affects NI LabVIEW 2026 Q3 and prior versions.

Lua library commands may lead to stack overflow and RCE in Redis

Redis is an open source, in-memory database that persists on disk. An authenticated user may use a specially crafted Lua script to trigger a stack buffer overflow in the bit library, which may potentially lead to remote code execution. The problem exists in all versions of Redis with Lua scripting. This problem has been fixed in Redis versions 6.2.16, 7.2.6, and 7.4.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

webkitgtk: Processing web content may lead to arbitrary code execution

The issue was addressed with improved memory handling. This issue is fixed in Safari 17.5, iOS 16.7.8 and iPadOS 16.7.8, iOS 17.5 and iPadOS 17.5, macOS Sonoma 14.5, tvOS 17.5, visionOS 1.2, watchOS 10.5. Processing web content may lead to arbitrary code execution.

Improper Encoding or Escaping of Output in GitLab

GitLab has remediated a security issue in GitLab CE/EE affecting all versions from 17.1 before 18.4.6, 18.5 before 18.5.4, and 18.6 before 18.6.2 that could have allowed an authenticated user to perform unauthorized actions on behalf of other users by injecting malicious HTML into vulnerability code flow displays.