Apache HTTP Server: mod_ssl TLS upgrade attack

In some mod_ssl configurations on Apache HTTP Server versions through to 2.4.63, an HTTP desynchronisation attack allows a man-in-the-middle attacker to hijack an HTTP session via a TLS upgrade. Only configurations using "SSLEngine optional" to enable TLS upgrades are affected. Users are recommended to upgrade to version 2.4.64, which removes support for TLS upgrade.

The Access Point functionality in eapol_auth_key_handle in eapol.c in iNet wireless daemon (IWD) before 2.14 allows attackers to gain unauthorized access to a protected Wi-Fi network. An attacker can complete the EAPOL handshake by skipping Msg2/4 and instead sending Msg4/4 with an all-zero key.

Authentication Bypass in Tenda N300 Wireless N VDSL2 Modem Router

Tenda N300 Wireless N VDSL2 Modem Router allows unauthenticated access to pages that in turn should be accessible to authenticated users only

bluez: unauthorized HID device connections allows keystroke injection and arbitrary commands execution

Bluetooth HID Hosts in BlueZ may permit an unauthenticated Peripheral role HID Device to initiate and establish an encrypted connection, and accept HID keyboard reports, potentially permitting injection of HID messages when no user interaction has occurred in the Central role to authorize such access. An example affected package is bluez 5.64-0ubuntu1 in Ubuntu 22.04LTS. NOTE: in some cases, a CVE-2020-0556 mitigation would have already addressed this Bluetooth HID Hosts issue.

Authenticated bypass in Netcomm router models NF20MESH, NF20, and NL1902 allows unauthenticated user to get access to content.

Authentication bypass in Netcomm router models NF20MESH, NF20, and NL1902 allows an unauthenticated user to access content. In order to serve static content, the application performs a check for the existence of specific characters in the URL (.css, .png etc). If it exists, it performs a "fake login" to give the request an active session to load the file and not redirect to the login page.

bluez: Passkey Entry protocol of the Bluetooth Core is vulnerable to an impersonation attack

Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication procedure) by reflection of the public key and the authentication evidence of the initiating device, potentially permitting this attacker to complete authenticated pairing with the responding device using the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit at a time.

kernel: predictable Authvalue in Bluetooth Mesh Provisioning Leads to MITM

Mesh Provisioning in the Bluetooth Mesh profile 1.0 and 1.0.1 may permit a nearby device (without possession of the AuthValue used in the provisioning protocol) to determine the AuthValue via a brute-force attack (unless the AuthValue is sufficiently random and changed each time).

The currency dispenser of NCR SelfSev ATMs running APTRA XFS 05.01.00 or earlier does not adequately authenticate session key generation requests from the host computer, allowing an attacker with physical access to internal ATM components to issue valid commands to dispense currency by generating a new session key that the attacker knows.

wpa_supplicant: potential authorization bypass

The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks.

An authentication issue was addressed with improved state management. This issue is fixed in macOS Ventura 13.6.4. A local attacker may be able to view the previous logged in user’s desktop from the fast user switching screen.

Vault Incorrectly Validated JSON Web Tokens (JWT) Audience Claims

Vault and Vault Enterprise did not properly validate the JSON Web Token (JWT) role-bound audience claim when using the Vault JWT auth method. This may have resulted in Vault validating a JWT the audience and role-bound claims do not match, allowing an invalid login to succeed when it should have been rejected. This vulnerability, CVE-2024-5798, was fixed in Vault and Vault Enterprise 1.17.0, 1.16.3, and 1.15.9

Authentication Bypass when using using older password hashes

Cacti provides an operational monitoring and fault management framework. Prior to version 1.2.27, Cacti calls `compat_password_hash` when users set their password. `compat_password_hash` use `password_hash` if there is it, else use `md5`. When verifying password, it calls `compat_password_verify`. In `compat_password_verify`, `password_verify` is called if there is it, else use `md5`. `password_verify` and `password_hash` are supported on PHP < 5.5.0, following PHP manual. The vulnerability is in `compat_password_verify`. Md5-hashed user input is compared with correct password in database by `$md5 == $hash`. It is a loose comparison, not `===`. It is a type juggling vulnerability. Version 1.2.27 contains a patch for the issue.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532.

httpd: ap_get_basic_auth_pw() authentication bypass

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

Zitadel Bypass Second Authentication Factor

Starting from 2.53.6, 2.54.3, and 2.55.0, Zitadel only required multi factor authentication in case the login policy has either enabled requireMFA or requireMFAForLocalUsers. If a user has set up MFA without this requirement, Zitadel would consider single factor auhtenticated sessions as valid as well and not require multiple factors. Bypassing second authentication factors weakens multifactor authentication and enables attackers to bypass the more secure factor. An attacker can target the TOTP code alone, only six digits, bypassing password verification entirely and potentially compromising accounts with 2FA enabled. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

Apache ActiveMQ: Insufficient API restrictions on Jolokia allow authenticated users to perform RCE

Once an user is authenticated on Jolokia, he can potentially trigger arbitrary code execution.  In details, in ActiveMQ configurations, jetty allows org.jolokia.http.AgentServlet to handler request to /api/jolokia org.jolokia.http.HttpRequestHandler#handlePostRequest is able to create JmxRequest through JSONObject. And calls to org.jolokia.http.HttpRequestHandler#executeRequest. Into deeper calling stacks, org.jolokia.handler.ExecHandler#doHandleRequest can be invoked through refection. This could lead to RCE through via various mbeans. One example is unrestricted deserialization in jdk.management.jfr.FlightRecorderMXBeanImpl which exists on Java version above 11. 1 Call newRecording. 2 Call setConfiguration. And a webshell data hides in it. 3 Call startRecording. 4 Call copyTo method. The webshell will be written to a .jsp file. The mitigation is to restrict (by default) the actions authorized on Jolokia, or disable Jolokia. A more restrictive Jolokia configuration has been defined in default ActiveMQ distribution. We encourage users to upgrade to ActiveMQ distributions version including updated Jolokia configuration: 5.16.6, 5.17.4, 5.18.0, 6.0.0.

libssh: authorization bypass in pki_verify_data_signature

A vulnerability was found in libssh, where the authentication check of the connecting client can be bypassed in the`pki_verify_data_signature` function in memory allocation problems. This issue may happen if there is insufficient memory or the memory usage is limited. The problem is caused by the return value `rc,` which is initialized to SSH_ERROR and later rewritten to save the return value of the function call `pki_key_check_hash_compatible.` The value of the variable is not changed between this point and the cryptographic verification. Therefore any error between them calls `goto error` returning SSH_OK.

FreeRDP Server authentication might allow invalid credentials to pass

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). Prior to version 2.7.0, server side authentication against a `SAM` file might be successful for invalid credentials if the server has configured an invalid `SAM` file path. FreeRDP based clients are not affected. RDP server implementations using FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0 contains a fix for this issue. As a workaround, use custom authentication via `HashCallback` and/or ensure the `SAM` database path configured is valid and the application has file handles left.

Server side NTLM does not properly check parameters in FreeRDP

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager (NTLM) authentication does not properly abort when someone provides and empty password value. This issue affects FreeRDP based RDP Server implementations. RDP clients are not affected. The vulnerability is patched in FreeRDP 2.7.0. There are currently no known workarounds.

389-ds-base: expired password was still allowed to access the database

A vulnerability was found in the 389 Directory Server that allows expired passwords to access the database to cause improper authentication.