X.Org Server glamor Xv Image Size Integer Overflow

A integer overflow in glamor Xv Image Size handling in X.Org xwayland before 24.1.15 and X server before 21.1.26 could be used by authenticated clients to crash the X server or leak out data.

Gcc: out-of-bounds read in std::from_chars

A flaw was found in gcc. An attacker could cause a Denial of Service (DoS) by passing a string that is not null-terminated to the std::from_chars() function in the libstdc++ library. This issue triggers an out-of-bounds read beyond the allocated buffer, potentially leading to invalid data parsing or an application crash.

Rpm: heap-based buffer overflow write in hex2binv() via a mistyped rpmtag_filesignatures header tag

A heap-based buffer overflow flaw was found in rpm. RPMTAG_FILESIGNATURES in a crafted, unsigned RPM package's main header is declared with the wrong header type, causing hex2binv() to allocate a one-byte buffer and then write the tag's attacker-controlled, hex-decoded content — of attacker-chosen length — past the end of that allocation. This is reachable via rpm2cpio, rpm2archive, and rpm -qlvp on an untrusted package.

Busybox: busybox: udhcpc integer underflow in dhcp packet length calculation causes denial of service

A flaw was found in BusyBox's udhcpc DHCP client. When processing raw DHCP packets, the client replaces the validated packet length with an attacker-controlled value from the IP header without re-validating the minimum size. This leads to an integer underflow when subtracting header sizes, causing a subsequent memory copy with a massively oversized length. An attacker on the same network segment can send a specially crafted packet to crash the DHCP client, resulting in denial of service and loss of network connectivity.

Libmodulemd: libmodulemd: out-of-bounds read when emitting rpm-map artifacts

A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service.

Podman: containers-common: containers-common: default seccomp af_vsock/netlink_audit deny rules bypassable via 32-bit truncation

A flaw was found in the default seccomp profile used by Podman via containers-common. Deny rules for AF_VSOCK and NETLINK_AUDIT compared socket arguments with unmasked 64-bit equality. Because the kernel truncates those int arguments to 32 bits, setting upper bits can bypass the deny rules.

FFmpeg through 9.0.2 GIF Encoder Heap Buffer Overflow via shrunk_buf Remap

FFmpeg through 9.0.2 contains a heap buffer overflow in the GIF encoder's gif_image_write_image() in libavcodec/gif.c because shrunk_buf is sized from the first frame's linesize. Attackers can supply PAL8 video whose frame linesize grows mid-stream, causing remap_frame_to_palette() to write past shrunk_buf and corrupt the heap during GIF transcoding.

Gcc: integer wrap in `std

A flaw was found in the libstdc++ component of GCC. An attacker who can provide an excessively large element count to a boolean vector (std::vector<bool>) constructor can trigger an integer wrap during internal memory calculations. This issue leaves the container in an inconsistent state, leading to out-of-bounds memory access and resulting in an application crash or a Denial of Service (DoS) during subsequent operations.

Uv: uv: specially crafted zip archives lead to arbitrary code execution due to parsing differentials

A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package.

In spm_alloc of encoder, there is a possible Heap Buffer Overflow due to a heap buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation.

In slice_header of hevc_decoder, there is a possible Non-Heap Buffer Overflow due to a buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation.

Active Support: Possible DoS vulnerability in Active Support safe_constantize

Active Support is a collection of utility classes and standard library extensions used by Rails and other Ruby projects. Prior to 8.1.4.1 and 8.0.5.2, when constant lookup raises LoadError, ActiveSupport::Inflector#safe_constantize (and String#safe_constantize) builds a regular expression from the requested constant name without escaping it, so a caller that passes untrusted input lets the attacker choose the source of a pattern that the application compiles. Crafted patterns can trigger defects in Ruby's regular expression compiler, possibly leading to a crash of the server process, and repeated requests could keep the application unavailable. Action Cable passes the channel value of each subscribe command to safe_constantize before any channel lookup, so an unauthenticated client can reach this code when the application mounts Action Cable and accepts connections from untrusted clients without an added authentication check. This issue is fixed in versions 8.1.4.1 and 8.0.5.2.

Out-of-bounds read in Bluetooth Host periodic advertising report reassembly due to unvalidated report length

bt_hci_le_per_adv_report_common() in subsys/bluetooth/host/scan.c handles the HCI_LE_Periodic_Advertising_Report (and _v2) event. It verified that the fixed event header was present and that the controller-declared Data_Length fits the tailroom of the periodic-sync reassembly buffer, but never checked that the event actually carried as many data bytes as evt->length claims. Both reassembly paths — DATA_STATUS_PARTIAL, and DATA_STATUS_COMPLETE while a chain is already in progress — then called net_buf_simple_add_mem(&per_adv_sync->reassembly, buf->data, evt->length), copying up to 255 bytes starting past the end of the event's real payload. The Data_Length field originates in the HCI controller, so the flaw is reachable in host-only/split builds where the controller is a separate part reached over H4 UART, SPI, USB or an inter-core IPC transport: a malicious, compromised or buggy controller (or an attacker able to inject on that link) can send a report declaring a length larger than the event payload. The generic event dispatcher in subsys/bluetooth/host/hci_core.c only enforces a per-event minimum length and never cross-checks the subevent's internal length field, so nothing else catches it. Builds using Zephyr's own in-image controller are not affected, because the controller always emits a length matching the bytes it appends. Exploitation additionally requires CONFIG_BT_PER_ADV_SYNC with CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 (the option defaults to 0, which compiles the reassembly block out; LE Audio broadcast-sink and Public Broadcast Profile applications that reassemble fragmented periodic advertising data set it), and an established periodic advertising sync. The consequence is an out-of-bounds read of adjacent HCI RX-pool memory — including stale contents of previously received HCI events — which is copied into the reassembly buffer and then delivered to every registered bt_le_per_adv_sync_cb.recv listener as if it were received advertising data, so the disclosed memory becomes application-visible and may be forwarded off-device. The write side remains in bounds because the tailroom check uses the same length value, so there is no memory corruption; impact is limited to information disclosure and undefined behaviour on the over-read. The fix drops any report whose declared length exceeds the remaining event payload, matching the guard already present in the extended and legacy advertising report handlers.

Bluetooth Classic RFCOMM: integer underflow in the MCC TEST command handler leads to out-of-bounds read disclosed to the peer and out-of-bounds write

The RFCOMM multiplexer control-channel handler in subsys/bluetooth/host/classic/rfcomm.c computed the echo length for a BT_RFCOMM_TEST command as buf->len - 1 and passed it to rfcomm_send_test(), whose length parameter is a uint8_t. A malformed but FCS-valid UIH frame on DLCI 0 can leave buf->len == 0 after rfcomm_handle_msg() pulls the two-byte MCC header, so buf->len - 1 underflows and narrows to 255. rfcomm_send_test() then copies 255 bytes out of a receive buffer that holds no remaining valid data, and appends them to an outgoing L2CAP PDU allocated with only CONFIG_BT_L2CAP_TX_MTU (253 by default for CONFIG_BT_CLASSIC) bytes of tailroom. The source read runs past the end of the ACL receive buffer into adjacent buffers of the same net_buf pool, and the destination copy overruns the transmit buffer by about eight bytes; net_buf_add_mem() performs no runtime bounds check in ordinary builds, where the underlying __ASSERT_NO_MSG() is compiled out. The trigger is a single five-byte RFCOMM frame on the multiplexer control channel, which is processed as soon as the L2CAP channel for PSM 3 is established — before any DLC exists and independent of RFCOMM session state. bt_rfcomm_init() registers that L2CAP server with .sec_level = BT_SECURITY_L1, which l2cap_br_conn_security() accepts without any link key from a peer that does not claim host Secure Simple Pairing support, so an unpaired BR/EDR device in radio range of a connectable target with CONFIG_BT_RFCOMM enabled (SPP, HFP, HSP, GOEP and similar profiles all enable it) can reach the defect. The resulting 255-byte TEST response is transmitted back to the attacker, disclosing roughly 255 bytes of adjacent stack/pool memory — including the contents of neighbouring receive buffers, which an attacker can prime with earlier packets — and the accompanying out-of-bounds write corrupts memory following the transmit buffer, which can crash the Bluetooth host. The request is trivially repeatable, so both the disclosure and the corruption can be driven at will. Two fixes are needed, and the first on its own does not close the out-of-bounds write. Fix 1 (0040ef781e1d, #115768) strips the FCS byte in rfcomm_recv() and echoes buf->len, rejecting anything over UINT8_MAX, which removes the underflow and the over-read. But rfcomm_make_uih_msg() still allocates the response with bt_l2cap_create_pdu() and never compares the requested length with the buffer's tailroom, so a well-formed TEST command carrying a pattern of about 248 bytes or more still builds a response (3-byte frame header, 2-byte message header, pattern, FCS) larger than the 253 bytes available. A pattern that long can only be received when the RFCOMM L2CAP receive MTU (CONFIG_BT_RFCOMM_L2CAP_MTU, which defaults to CONFIG_BT_BUF_ACL_RX_SIZE) exceeds CONFIG_BT_L2CAP_TX_MTU. The plain BR/EDR defaults (200 against 253) cannot reach it, but from v4.3.0 enabling CONFIG_BT_GOEP raises CONFIG_BT_BUF_ACL_RX_SIZE to 264 (265 from v4.4.0), so GOEP builds with only fix 1 applied still overrun the transmit buffer by up to eight bytes. This includes v4.3.2, the last v4.3 release, which carries fix 1 but will not receive fix 2. Fix 2 (214530895dd3, #118293) checks the tailroom on every RFCOMM PDU allocation and closes this residual write.

X.Org Server XvQueryImageAttributes Negative Size Reply

A buffer overread caused by casting a negative integer to CARD32 in XvQueryImageAttributes in X.Org X Server before 21.1.26 and xwayland before 24.1.15 could be used to causes crashes by authenticated X clients.

Stored XSS in the @waline/client UserList widget via an unescaped commenter link field

Waline is a comment system with backend support. In versions 3.15.2 and prior, the @waline/client UserList widget builds its DOM by concatenating server-returned commenter fields directly into root.innerHTML with no HTML escaping. The commenter nick and link are stored and returned verbatim by the server (only the comment body is sanitized), and the link field is never sent to the spam filter. So an unauthenticated visitor who posts a comment with link = x"><img src=x onerror=...> achieves stored cross-site scripting that executes, with no interaction, in the browser of every visitor to a page that embeds the UserList widget. At time of publication, there are no publicly available patches.

Stored XSS in @waline/client via the unsanitized markdown preview of a comment's raw body on edit

Waline is a comment system with backend support. In versions 3.15.2 and prior, @waline/client renders the comment editor's live preview with marked and no sanitizer (utils/markdown.ts), and the preview is injected with v-html. When a comment is edited, the editor is seeded with the comment's raw, un-sanitized body (orig). Only administrators and the comment owner can edit. So an administrator who clicks Edit on an attacker's comment renders that attacker's raw HTML in their own session: an unauthenticated commenter achieves privilege-escalation stored XSS against a moderator with a single Edit click. At time of publication, there are no publicly available patches.

pam_usb: Heap out-of-bounds read in pusb_get_tty_from_display_server cmdline scan

pam_usb provides hardware authentication for Linux using removable media. Prior to version 0.9.3, src/local.c (pusb_get_tty_from_display_server) allocates a 4096-byte cmdline buffer, reads up to 4096 bytes from /proc//cmdline, then replaces every NUL separator with a space. When read(2) returns exactly 4096 bytes for any process the function inspects, the buffer ends without a terminator and the subsequent strstr() calls scan past the allocation boundary. The function is invoked during normal PAM authentication when DISPLAY is set, so the read fires for every process at auth time. Consequences are bounded: strstr output is a Boolean substring match (limited info-disclosure surface) but a hostile heap layout can produce a SIGSEGV that terminates the host PAM process. This issue has been patched in version 0.9.3.

Cudy TR3000 before 2.5.42 Stack Buffer Overflow via CWMP Basic Authorization Builder

Cudy TR3000 before 2.5.42 contains a stack buffer overflow vulnerability in the CWMP client that allows a malicious ACS to corrupt stack memory via oversized credentials. Attackers controlling the ACS can send Username and Password values up to 256 bytes in TR-069 Download or Upload requests, overflowing 128-byte stack buffers and crashing the CWMP process.

Cudy TR3000 before 2.5.42 Stack Buffer Overflow via stun_client UDP Parser

Cudy TR3000 before 2.5.42 contains an unauthenticated stack buffer overflow vulnerability in the stun_client TR-111 UDP Connection Request parser that parses requests before verifying username or HMAC. Remote attackers can send a single crafted UDP datagram lacking a space in the request line, causing strncpy() to overflow a 10-byte stack buffer and crash stun_client for denial of service.