A flaw was found in Ansible Collection community.crypto. openssl_privatekey_info exposes private key in logs. This directly impacts confidentiality

Junos OS: Receipt of certain genuine BGP packets from any BGP Speaker causes RPD to crash.

An improper use of a validation framework when processing incoming genuine BGP packets within Juniper Networks RPD (routing protocols process) daemon allows an attacker to crash RPD thereby causing a Denial of Service (DoS) condition. This framework requires these packets to be passed. By continuously sending any of these types of formatted genuine packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Authentication to the BGP peer is not required. This issue can be initiated or propagated through eBGP and iBGP and can impact devices in either modes of use as long as the devices are configured to support the compromised framework and a BGP path is activated or active. This issue affects: Juniper Networks Junos OS 16.1 versions 16.1R7-S6 and later versions prior to 16.1R7-S8; 17.3 versions 17.3R2-S5, 17.3R3-S6 and later versions prior to 17.3R3-S8; 17.4 versions 17.4R2-S7, 17.4R3 and later versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions 18.1R3-S7 and later versions prior to 18.1R3-S10; 18.2 versions 18.2R2-S6, 18.2R3-S2 and later versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions 18.2X75-D12, 18.2X75-D32, 18.2X75-D33, 18.2X75-D51, 18.2X75-D60, 18.2X75-D411, 18.2X75-D420 and later versions prior to 18.2X75-D32, 18.2X75-D33, 18.2X75-D420, 18.2X75-D52, 18.2X75-D60, 18.2X75-D65, 18.2X75-D70;(*1) 18.3 versions 18.3R1-S6, 18.3R2-S3, 18.3R3 and later versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions 18.4R1-S5, 18.4R2-S4, 18.4R3 and later versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S3(*2); 19.1 versions 19.1R1-S3, 19.1R2 and later versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3-S2; 19.2 versions 19.2R1-S2, 19.2R2 and later versions prior to 19.2R1-S5, 19.2R2, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affect Junos OS prior to 16.1R1. This issue affects IPv4 and IPv6 traffic.

Ansible: module_args does not censor properly in --check mode

A flaw was found in the Ansible Engine when using module_args. Tasks executed with check mode (--check-mode) do not properly neutralize sensitive data exposed in the event data. This flaw allows unauthorized users to read this data. The highest threat from this vulnerability is to confidentiality.

GateManager Audit Message Spoofing Vulnerability

The information disclosure vulnerability present in B&R GateManager 4260 and 9250 versions <9.0.20262 and GateManager 8250 versions <9.2.620236042 allows authenticated users to generate fake audit log messages.

ghostscript: Mishandling of .completefont (incomplete fix for CVE-2019-3839)

Artifex Ghostscript through 9.26 mishandles .completefont. NOTE: this issue exists because of an incomplete fix for CVE-2019-3839.

Ansible: Splunk and Sumologic callback plugins leak sensitive data in logs

Ansible, versions 2.9.x before 2.9.1, 2.8.x before 2.8.7 and Ansible versions 2.7.x before 2.7.15, is not respecting the flag no_log set it to True when Sumologic and Splunk callback plugins are used send tasks results events to collectors. This would discloses and collects any sensitive data.

ansible: sub parameters marked as no_log are not masked in certain failure scenarios

A vulnerability was found in Ansible engine 2.x up to 2.8 and Ansible tower 3.x up to 3.5. When a module has an argument_spec with sub parameters marked as no_log, passing an invalid parameter name to the module will cause the task to fail before the no_log options in the sub parameters are processed. As a result, data in the sub parameter fields will not be masked and will be displayed if Ansible is run with increased verbosity and present in the module invocation arguments for the task.

library-go: Secret data written to static pod logs when operator set at Debug level or higher

OpenShift Container Platform 4 does not sanitize secret data written to static pod logs when the log level in a given operator is set to Debug or higher. A low privileged user could read pod logs to discover secret material if the log level has already been modified in an operator by a privileged user.

ansible: secrets disclosed on logs when no_log enabled

In Ansible, all Ansible Engine versions up to ansible-engine 2.8.5, ansible-engine 2.7.13, ansible-engine 2.6.19, were logging at the DEBUG level which lead to a disclosure of credentials if a plugin used a library that logged credentials at the DEBUG level. This flaw does not affect Ansible modules, as those are executed in a separate process.

docker: Docker Engine in debug mode may sometimes add secrets to the debug log leading to information disclosure

In Docker CE and EE before 18.09.8 (as well as Docker EE before 17.06.2-ee-23 and 18.x before 18.03.1-ee-10), Docker Engine in debug mode may sometimes add secrets to the debug log. This applies to a scenario where docker stack deploy is run to redeploy a stack that includes (non external) secrets. It potentially applies to other API users of the stack API if they resend the secret.

openshift: Secret data written to pod logs when operator set at Debug level or higher

OpenShift Container Platform, versions 4.1 and 4.2, does not sanitize secret data written to pod logs when the log level in a given operator is set to Debug or higher. A low privileged user could read pod logs to discover secret material if the log level has already been modified in an operator by a privileged user.

lldptool: improper sanitization of shell-escape codes

lldptool version 1.0.1 and older can print a raw, unsanitized attacker controlled buffer when mngAddr information is displayed. This may allow an attacker to inject shell control characters into the buffer and impact the behavior of the terminal.

jenkins-plugin-credentials-binding: improper masking of the secret provided to the build in rare circumstances

Jenkins Credentials Binding Plugin 1.14 and earlier masks passwords it provides to build processes in their build logs. Jenkins however transforms provided password values, e.g. replacing environment variable references, which could result in values different from but similar to configured passwords being provided to the build. Those values are not subject to masking, and could allow unauthorized users to recover the original password.

squid: Incorrect pointer handling in HTTP processing and certificate download can lead to denial of service

The Squid Software Foundation Squid HTTP Caching Proxy version prior to version 4.0.23 contains a NULL Pointer Dereference vulnerability in HTTP Response X-Forwarded-For header processing that can result in Denial of Service to all clients of the proxy. This attack appear to be exploitable via Remote HTTP server responding with an X-Forwarded-For header to certain types of HTTP request. This vulnerability appears to have been fixed in 4.0.23 and later.

Power Platform Terraform Provider has Improper Masking of Secrets in Logs

Power Platform Terraform Provider allows managing environments and other resources within Power Platform. Versions prior to 3.0.0 have an issue in the Power Platform Terraform Provider where sensitive information, specifically the `client_secret` used in the service principal authentication, may be exposed in logs. This exposure occurs due to an error in the logging code that causes the `client_secret` to not be properly masked when logs are persisted or viewed. Users should upgrade to version 3.0.0 to receive a patched version of the provider that removes all logging of sensitive content. Users who have used this provider with the affected versions should take the following additional steps to mitigate the risk: Immediately rotate the `client_secret` for any service principal that has been configured using this Terraform provider. This will invalidate any potentially exposed secrets. Those who have set the `TF_LOG_PATH` environment variable or configured Terraform to persist logs to a file or an external system, consider disabling this until they have updated to a fixed version of the provider. Those who have existing logs that may contain the `client_secret` should remove or sanitize these logs to prevent unauthorized access. This includes logs on disk, in monitoring systems, or in logging services.

Malicious log injection via access logs in envoy

Envoy is a cloud-native high-performance edge/middle/service proxy. A vulnerability has been identified in Envoy that allows malicious attackers to inject unexpected content into access logs. This is achieved by exploiting the lack of validation for the `REQUESTED_SERVER_NAME` field for access loggers. This issue has been addressed in versions 1.31.2, 1.30.6, 1.29.9, and 1.28.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

master-nan Sweet-CMS log.go LogHandler neutralization for logs

A vulnerability was found in master-nan Sweet-CMS up to 5f441e022b8876f07cde709c77b5be6d2f262e3f. It has been rated as problematic. This issue affects the function LogHandler of the file middleware/log.go. The manipulation leads to improper output neutralization for logs. The attack may be initiated remotely. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The identifier of the patch is 2024c370e6c78b07b358c9d4257fa5d1be732c38. It is recommended to apply a patch to fix this issue.

kitsada8621 Digital Library Management System jwt_refresh_token_middleware.go JwtRefreshAuth neutralization for logs

A vulnerability was found in kitsada8621 Digital Library Management System 1.0. It has been classified as problematic. Affected is the function JwtRefreshAuth of the file middleware/jwt_refresh_token_middleware.go. The manipulation of the argument Authorization leads to improper output neutralization for logs. It is possible to launch the attack remotely. The name of the patch is 81b3336b4c9240f0bf50c13cb8375cf860d945f1. It is recommended to apply a patch to fix this issue.